Helical Gearboxes
- Special App. Helical & Bevel Gearbox
Single Screw Extruder
GHE Series - Extruder Gearbox
Range
Power range upto 250 KW. Reduction ratio upto 25.6/1
Applications
Plastic Extrusion & PVC Extrusion
Single Screw Extruder
Features
- The gear units are quite capable to transmit the high torque required for pressurising and plasticising moulding materials and also to absorb the high axial thrust load through built-in spherical roller thrust bearing. The axial bearing housing is standardised to accommodate suitable thrust bearings and corresponding output shafts with key are splined.
- Sizes available from 112mm to 355mm center distance
Single Screw Extruder
Cooling Tower Gearbox
Bevel Helical Cooling Tower Gearbox
Range
Power range upto 600 KW. Reduction ratio upto 15.4/1
Applications
Cooling Tower and Heat Exchanger
Cooling Tower Gearbox
Features
- Case Hardened and Lapped steel spiral bevel gears to transmit the torque between right angle shaft. Unicase design with Pumpless Lubrication and three-point Foundation.
- Industries covered are - Sugar, Cement, Paper, Solvent Extraction, Steel Industry, Power Plants.
- Sizes available from 140mm to 450mm center distance.
Cooling Tower Gearbox
Aerator Gearbox
Aerator Gearbox
Range
112 to 250 with ratio of 25.6:1 to 42.5:1
Applications
Water Filteration
Aerator Gearbox
Features
- "GA" series parallel shaft vertical gear drives in triple reduction are intended to satisfy characteristic requirements and conditions encountered in Aerator application.
- Sizes available from 112 to 250 with ratio range of 25.6 : 1 to 42.5 : 1
Aerator Gearbox
Coal Pulverzing Mill Gearbox
8.5 ES / 8.5 Ex / 10P (2/3 stage)
Range
Power range upto 400 kW
Applications
Vertical Coal Pulverizing
Coal Pulverzing Mill Gearbox
Features
- Bevel helecal gear units capable of taking large vertical downward thrust load. Cast Iron Case designed to absorb excess vibration during running of mill.
- Industries covered are - Cement, Paper, Steel & Power Plants
- Sizes available from 760 mm to 1000 mm center distance